Linksys SFE2000 Reference Manual page 131

– Static — Indicates the ARP entry is a static entry.
2. Add ARP button. The ARP Settings Page opens:
Click on the
The ARP Settings Page contains the following fields:
• Interface — Indicates the interface connected to the device.
• IP Address — Indicates the station IP address, which is associated with the MAC address filled in
below.
• MAC Address — Indicates the station MAC address, which is associated in the ARP table with the
IP address.
3. Define the relevant fields.
4. Click Apply. The ARP Settings are defined, and the device is updated.
Modifying ARP Settings
1. Click System > System Management > IP Addressing > ARP. The ARP Page opens:
2. Click the Edit button. The ARP Settings Page opens:
Chapter 7:
SFE2000/SFE2000P Gigabit Ethernet Switch Reference Guide
ARP Settings Page
Chapter
7
125