Linksys SFE2000 Reference Manual page 146

Chapter
9 SFE2000/SFE2000P Gigabit Ethernet Switch Reference Guide
The Edit Multicast Group Page contains the following fields:
• VLAN ID — Displays the VLAN ID.
• Bridge Multicast IP Address — Displays the IP address attached to the Multicast Group.
• Bridge Multicast MAC Address — Displays the MAC address attached to the Multicast Group.
• Interface — Displays the port attached to the Multicast Group.
• Interface Status — Displays the interface status. The options are as follows:
– Static — Attaches the port to the Multicast group as static member in the Static Row. The
port/LAG has joined the Multicast group statically in the Current Row.
– Forbidden — Forbidden ports are not included the Multicast group, even if IGMP snooping
designated the port to join a Multicast group.
– Excluded — The port is not part of a Multicast group.
– Dynamic — Attaches the port to the Multicast group as dynamic member.
3. Define the Multicast Group Port Settings.
4. Click Apply. The Multicast group parameters are saved, and the device is updated.
140
Edit Multicast Group Page
Chapter 9: