Statistics > Rmon History; Log Table - Linksys SRW208 User Manual

Chapter 5
Indicates that the RMON statistics are refreshed
30 Sec
every 30 seconds.
Indicates that the RMON statistics are refreshed
60 Sec
every 60 seconds.
Displays the number of dropped events
Drop Events
that have occurred on the interface since the device was
last refreshed.
Displays the number of octets
Received Bytes (Octets)
received on the interface since the device was last
refreshed. This number includes bad packets and FCS
octets, but excludes framing bits.
Displays the number of packets
Received Packets
received on the interface, including bad packets,
Multicast and broadcast packets, since the device was last
refreshed.
Broadcast Packets Received
good broadcast packets received on the interface since
the device was last refreshed. This number does not
include Multicast packets.
Multicast Packets Received
good Multicast packets received on the interface since the
device was last refreshed.
Displays the number of CRC and
CRC & Align Errors
Align errors that have occurred on the interface since the
device was last refreshed.
Displays the number of undersized
Undersize Packets
packets (less than 64 octets) received on the interface
since the device was last refreshed.
Displays the number of oversized
Oversize Packets
packets (over 1518 octets) received on the interface since
the device was last refreshed.
Displays the number of fragments (packets
Fragments
with less than 64 octets, excluding framing bits, but
including FCS octets) received on the interface since the
device was last refreshed.
Displays the total number of received packets
Jabbers
that were longer than 1518 octets. This number excludes
frame bits, but includes FCS octets that had either a bad
Frame Check Sequence (FCS) with an integral number of
octets (FCS Error) or a bad FCS with a non-integral octet
(Alignment Error) number. The field range to detect
jabbers is between 20 ms and 150 ms.
Displays the number of collisions received on
Collisions
the interface since the device was last refreshed.
Number of xx-byte frames received
Frames of xx Bytes
on the interface since the device was last refreshed.
This option will reset all of the
Clear Counters button
statistic counts.
8-Port 10/100 Ethernet Switch with Webview
Displays the number of
Displays the number of
Advanced Configuration
Use this option to refresh the
Refresh Now button
statistics.
Statistics > RMON History
The RMON History screen contains information about
samples of data taken from ports. For example, the samples
may include interface definitions or polling periods.
Statistics > RMON History
The RMON History screen is divided into RMON History
and Log Table.
Displays the interface from which the
Source Interface
history samples were taken. The possible field values are:
Specifies the port from which the RMON
Port
information was taken.
Specifies the port from which the RMON
LAG
information was taken.
Indicates (in seconds) the time
Sampling Interval
that samplings are taken from the ports. The field range
is 1-3600. The default is 1800 seconds (equal to 30
minutes).
Max No. of Samples to Keep
samples to save.
Displays the RMON station or user that requested
Owner
the RMON information. The field range is 0-20 characters.
The Add to List button adds the configured RMON
sampling to the Log Table at the bottom of the screen.

Log Table

Displays the number of samples to
Sampling Requested
be saved. The field range is 1-65535. The default value is
50.
Indicates the number of
27