Defining Access Control; Defining Mac Based Acl - Linksys SFE2000 Reference Manual

Defining Access Control

The Access Control section contains the following pages:
•

Defining MAC Based ACL

• Defining IP Based ACL
• Defining ACL Binding
Defining MAC Based ACL
The MAC Based ACL Page page allows a MAC- based ACL to be defined. ACEs can be added only if
the ACL is not bound to an interface. To define the MAC Based ACL:
1. Click Security Suite >Access Control > MAC Based ACL. The MAC Based ACL Page opens:
The MAC Based ACL Page contains the following fields:
• ACL Name — Displays the user-defined MAC based ACLs.
• Remove ACL — Deletes the selected ACL.
• Deny Following Destination MAC Addresses — Matches the destination MAC address and denies
packet access.
2. Click the Add ACL button. The Add MAC Based ACL Page opens:
Chapter 4:
SFE2000/SFE2000P Gigabit Ethernet Switch Reference Guide
MAC Based ACL Page
Chapter
4
61