Defining Dos Prevention; Global Settings - Linksys SFE2000 Reference Manual

• LAGs — Displays the LAGs bound by the ACL.
• Of Unit — Displays the stacking member for which the ACL binding parameters are displayed.
• Interface — Indicates the interface to which the ACL is bound.
• ACL Name — Indicates the ACL which is bound the interface.
Modifying ACL Binding
1. Click Security Suite > Access Control > ACL Binding. The ACL Binding Page opens:
2. Click the Edit button. The Bind ACL Page opens:
The Bind ACL Page contains the following fields:
• Interface — Indicates the interface to which the ACL is bound.
• Select ACL — Indicates the ACL which is bound the interface.
3. Define the relevant fields.
4. Click Apply. ACL binding is defined, and the device is updated.

Defining DOS Prevention

The DOS Prevention section contains the following pages:
•

Global Settings

• Defining Martian Addresses
Global Settings
1. Click Security Suite > Dos Prevention > Global Settings. The Global Settings Page opens:
Chapter 4:
SFE2000/SFE2000P Gigabit Ethernet Switch Reference Guide
Bind ACL Page
Chapter
4
71