Linksys SFE2000 Reference Manual page 249

Modify History Control Settings
1. Click Statistics > RMON > History. The RMON History Control Page opens.
2. Click the Edit button. The History Control Settings Page opens:
The History Control Settings Page contains the following fields:
• History Entry Number — Displays the entry number for the History Control Table page.
• Source Interface — Displays the interface from which the history samples were taken. The possible
field values are:
– Port — Specifies the port from which the RMON information was taken.
– LAG — Specifies the port from which the RMON information was taken.
• Owner — Displays the RMON station or user that requested the RMON information. The field
range is 0-20 characters.
• Max No. of Samples to Keep — Indicates the number of samples to save.
• Sampling Interval — Indicates in seconds the time that samplings are taken from the ports. The
field range is 1-3600. The default is 1800 seconds (equal to 30 minutes).
3. Define the relevant fields.
4. Click Apply. The history control settings are defined, and the device is updated.
Chapter 16:
SFE2000/SFE2000P Gigabit Ethernet Switch Reference Guide
History Control Settings Page
Chapter
16
243