Chapter
10
SFE2000/SFE2000P Gigabit Ethernet Switch Reference Guide
1. Click Bridging > Spanning Tree > MSTP > Interface Settings. The MSTP Interface Settings Page
opens:
The MSTP Instance Settings Page contains the following fields:
•
Instance ID — Lists the MSTP instances configured on the device. Possible field range is 0-15.
•
Interface — Displays the interface for which the MSTP settings are displayed. The possible field
values are:
–
Port — Specifies the port for which the MSTP settings are displayed.
–
LAG — Specifies the LAG for which the MSTP settings are displayed.
•
Port State— Indicates whether the port is enabled for the specific instance. The possible field values
are:
–
Enable — Enables the port for the specific instance.
–
Disable — Disables the port for the specific instance.
–
Forwarding — Enables forwarding all multicast packets on a port.
•
Type — Indicates if the port is a point-to-point port, or a port connected to a hub. The possible field
values are:
158
MSTP Interface Settings Page
Chapter 10: