Defining Queue - Linksys SFE2000 Reference Manual

Chapter
12 SFE2000/SFE2000P Gigabit Ethernet Switch Reference Guide
– Checked — Restores the factory QoS default settings to ports.
– Unchecked— Maintains the current QoS settings.
Modifying Interface Priorities
1. Click Quality of Service > General > CoS. The CoS Page opens:
2. Click the Edit button. The Edit Interface Priority Page opens:
The Edit Interface Priority Page contains the following fields:
• Interface — Indicates the port or LAG name.
• Set Default User Priority— Defines the default CoS value for incoming packets for which a VLAN
tag is not defined. The possible field values are 0-7. The default CoS is 0.
3. Modify the Interface priority.
4. Click Apply. The Interface priority is set, and the device is updated.

Defining Queue

The Queue Page contains fields for defining the QoS queue forwarding types.
1. Click Quality of Service > General > Queues. The Queue Page opens:
188
Edit Interface Priority Page
Chapter 12: