Linksys SFE2000 Reference Manual page 205

Modifying QoS Aggregate Policer
1. Click Quality of Service > Advanced > Aggregate Policer. The Aggregate Policer Page opens:
2. Click the Edit Button. The Edit QoS Aggregate Policer Page opens:
The Edit QoS Aggregate Policer Page contains the following fields.
• Aggregate Policer Name— Specifies the Aggregate Policer Name
• Ingress Committed Information Rate (CIR) — Defines the CIR in bits per second. This field is
only relevant when the Police value is Single.
• Ingress Committed Burst Size (CBS) — Defines the CBS in bytes per second. This field is only
relevant when the Police value is Single.
• Exceed Action — Action assigned to incoming packets exceeding the CIR. This field is only
relevant when the Police value is Single. Possible values are:
– Drop — Drops packets exceeding the defined CIR value.
– Remark DSCP —Remarks packet's DSCP values exceeding the defined CIR value.
– None —Forwards packets exceeding the defined CIR value.
3. Modify the relevant fields.
4. Click Apply. QoS aggregate policer settings are modified, and the device is updated.
Chapter 12:
SFE2000/SFE2000P Gigabit Ethernet Switch Reference Guide
Edit QoS Aggregate Policer Page
Chapter
12
199