Resetting The Device; Logging Off The Device - Linksys SFE2000 Reference Manual

Resetting the Device

The Reset page enables the device to be reset from a remote location. Save all changes to the Running
Configuration file before resetting the device. This prevents the current device configuration from being
lost. To reset the device:
1. Click System > General > Reset. The Reset page opens.
2. Click the Reset button.
E
resetting the entire stack. If the master unit is reset, the device is reset, and a prompt for a user name
and password is displayed.
3. Enter a user name and password to reconnect to the Web Interface, if the stack is not part of a full
Linksys One system. If the stack is part of a Linksys One system, login is automatically done from
the Service Router.

Logging Off The Device

1. Click . The system logs off. The Embedded Web System Home Page closes.
Chapter 1:
SFE2000/SFE2000P Gigabit Ethernet Switch Reference Guide
Reset Page
ach unit can be reset individually. Resetting the stack master results in
Chapter
1
9