Linksys SFE2000 Reference Manual page 198
Fast ethernet switch
Hide thumbs
Also See for SFE2000:
- Administration manual (50 pages) ,
- Quick installation manual (28 pages) ,
- Product data (4 pages)
Table of Contents
Advertisement
Chapter
12
SFE2000/SFE2000P Gigabit Ethernet Switch Reference Guide
The Bandwidth Page contains the following fields:
•
Port — Indicates the port for which the bandwidth settings are displayed.
•
LAG — Indicates the LAG for which the bandwidth settings are displayed.
•
Of Unit — Displays the stacking member for which the bandwidth settings are displayed.
•
Ingress Rate Limit Status — Indicates if rate limiting is defined on the interface. The possible field
values are:
–
Enable — Enables ingress rate limiting on the interface.
–
Disable — Disables ingress rate limiting on the interface.
•
Rate Limit — Defines the amount of bandwidth assigned to the interface. The possible field values
are 62-1000000 Kbps.
•
Committed Information Rate (CIR) — Defines CIR as the queue shaping type. The possible field
value is 64-1,000,000 Kbs.
•
Committed Burst Size (CbS) — Defines CBS as the queue shaping type. The possible field value is
4096-16,769,020 bits.
Note This field is not supported on FE ports.
Modifying Bandwidth Settings
1. Click Quality of Service > General > Bandwidth. The Bandwidth Page opens:
192
Bandwidth Page
Chapter 12:
Hide quick links:
Advertisement
Table of Contents
