Viewing Rmon Statistics - Linksys SFE2000 Reference Manual

Viewing RMON Statistics

The RMON Statistics Page contains fields for viewing information about device utilization and errors
that occurred on the device. To view the RMON statistics:
1. Click Statistics > RMON > Statistics. The RMON Statistics Page opens:
The RMON Statistics Page contains fields for viewing information about device utilization and errors
that occurred on the device. The RMON Viewing RMON Statistics page contains the following fields:
• Interface — Indicates the device for which statistics are displayed. The possible field values are:
– Port — Defines the specific port for which RMON statistics are displayed.
– LAG — Defines the specific LAG for which RMON statistics are displayed.
• Refresh Rate — Defines the amount of time that passes before the interface statistics are refreshed.
The possible field values are:
– 15 Sec — Indicates that the RMON statistics are refreshed every 15 seconds.
– 30 Sec — Indicates that the RMON statistics are refreshed every 30 seconds.
– 60 Sec — Indicates that the RMON statistics are refreshed every 60 seconds.
– No Refresh — Indicates that the RMON statistics are not refreshed.
Chapter 16:
SFE2000/SFE2000P Gigabit Ethernet Switch Reference Guide
RMON Statistics Page
Chapter
16
239