Chapter 5: Configuring Device Interfaces; Defining Port Settings - Linksys SFE2000 Reference Manual

Configuring Device Interfaces
This section contains information for configuring ports and contains the following topic:
•

Defining Port Settings

• Defining LAG Management
• Defining LAG Settings
• Configuring LACP
Defining Port Settings
Port Settings Page
The contains fields for defining port parameters.
1. Click Bridging > Port Management > Port Settings. The Port Settings Page opens:
The Port Settings Page
contains the following fields:
• Copy from Entry Number — Copies port information from the selected port.
• to Entry Number(s) — Copies port information to the selected port.
• Unit Number — Indicates the stacking member for which the ports are defined.
• Interface — Displays the port number.
Chapter 5:
SFE2000/SFE2000P Gigabit Ethernet Switch Reference Guide
To define port settings:
Port Settings Page
Chapter
5
75