Vlan Management Tab - Gvrp; Statistics Tab - Rmon Statistics; Figure 5-16: Vlan Management - Gvrp - Linksys SRW208 User Manual

WebView Switches

VLAN Management Tab - GVRP

GARP VLAN Registration Protocol (GVRP) is specifically provided for automatic distribution of VLAN membership
information among VLAN-aware bridges. GVRP allows VLAN-aware bridges to automatically learn VLANs to
bridge ports mapping, without having to individually configure each bridge and register VLAN membership.
The Global System LAG information displays the same field information as the ports, but represent the LAG GVRP
information.
The GVRP screen is divided into two areas, GVRP and GVRP Table. The field definitions for both areas are the
same.
Enable GVRP. Enables and disables GVRP on the device.
Interface. DIsplays the interface on which GVRP is enabled. The possible field values are:
• Port. Indicates the port number on which GVRP is enabled.
• LAG. Indicates the LAG number on which GVRP is enabled.
GVRP State. When the checkbox is checked, GVRP is enabled on the interface.
Dynamic VLAN Creation. When the checkbox is checked, Dynamic VLAN creation is enabled on the interface.
GVRP Registration. When the checkbox is checked, VLAN registration through GVRP is enabled on the device.
The Update button adds the configured GVRP setting to the table at the bottom of the screen.

Statistics Tab - RMON Statistics

The RMON Statistics screen contains fields for viewing information about device utilization and errors that
occurred on the device.
Interface. Indicates the device for which statistics are displayed. The possible field values are:
• Port. Defines the specific port for which RMON statistics are displayed.
• LAG. Defines the specific LAG for which RMON statistics are displayed.
Chapter 5: Using the Web-based Utility for Configuration
VLAN Management Tab - GVRP

Figure 5-16: VLAN Management - GVRP

43