Configuring Radius Throttling On A Server Group - Cisco ASR 9000 Series Configuration Manual

Configuring Authentication, Authorization, and Accounting Functions
Command or Action
Configuring RADIUS Throttling Globally: An example
configure
radius-server throttle access 10 access-timeout 5 accounting 10
!
end

Configuring RADIUS Throttling on a Server Group

Perform this task to activate RADIUS throttling on a server group.
SUMMARY STEPS
1. configure
2. aaa group server radius server_group_name
3. server hostname acct-port acct_port_value auth-port auth_port_value
4. throttle access threshold_value access-timeout value accounting threshold_value
5. Use the commit or end command.
DETAILED STEPS
Command or Action
Step 1 configure
Example:
RP/0/RSP0/CPU0:router# configure
Step 2 aaa group server radius server_group_name
Example:
RP/0/RSP0/CPU0:router(config)# aaa group server radius
SG1
OL-28375-03
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Configuration Guide, Release
Configuring RADIUS Throttling on a Server Group
Purpose
• Yes— Saves configuration changes and exits the configuration
session.
• No—Exits the configuration session without committing the
configuration changes.
• Cancel—Remains in the configuration mode, without
committing the configuration changes.
Purpose
Enters global configuration mode.
Configures the AAA (RADIUS) server-group definition.
4.3.x
55