Deploying the Quality of Service (QoS)
If the sequence numbers of two policies to be merged are configured to be the same, the order in which
Note
they are merged with respect to each other is random, and may change after the process restarts. Such
configurations must be avoided.
Enabling Policy-maps Merge
Perform this task to enable merging of multiple QoS policy-maps applied through multiple dynamic templates.
SUMMARY STEPS
1. configure
2. dynamic-template
3. type service dynamic-template-name
4. service-policy {input | output | type} service-policy_name [acct-stats] [merge seq_num]
5. Use the commit or end command.
DETAILED STEPS
Command or Action
Step 1
configure
Example:
RP/0/RSP0/CPU0:router# configure
Step 2
dynamic-template
Example:
RP/0/RSP0/CPU0:router(config)# dynamic-template
Step 3
type service dynamic-template-name
Example:
RP/0/RSP0/CPU0:router(config-dynamic-template)# type
service s1
Step 4
service-policy {input | output | type} service-policy_name
[acct-stats] [merge seq_num]
Example:
RP/0/RSP0/CPU0:router(config-dynamic-template-type)#
service-policy input QoS1 merge 10
RP/0/RSP0/CPU0:router(config-dynamic-template-type)#
service-policy output QoS2 merge 20
Step 5
Use the commit or end command.
OL-28375-03
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Configuration Guide, Release
Enabling Policy-maps Merge
Purpose
Enters global configuration mode.
Enters the dynamic-template configuration mode.
Creates a dynamic-template with a user-defined name
for a service.
Associates a service-policy to the dynamic template, and
enables merging of multiple QoS policies.
commit—Saves the configuration changes and remains
within the configuration session.
4.3.x
201