Configuring Radius Attribute Nas-Port-Type - Cisco ASR 9000 Series Configuration Manual

Configuring RADIUS Attribute Nas-port-type

Command or Action
Step 2
aaa radius attribute
Example:
RP/0/RSP0/CPU0:router(config)# aaa radius
attribute
Step 3
nas-port format e string type nas-port-type value
Example:
RP/0/RSP0/CPU0:router(config)# nas-port
format e format1 type 30
Step 4 nas-port-id format format name
Example:
RP/0/RSP0/CPU0:router(config)# nas-port-id
format format2
Step 5 Use the commit or end command.
Configuring RADIUS Attribute Format: An example
configure
aaa radius attribute
nas-port format e abcd type 40
nas-port-id format ADEF
!
end
Configuring RADIUS Attribute Nas-port-type
Perform this task to configure RADIUS Attribute nas-port-type on a physical interface or VLAN sub-interface:
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Configuration Guide,
Release 4.3.x
40
Configuring Authentication, Authorization, and Accounting Functions
Purpose
Configures the AAA radius attribute.
Configures the format for nas-port attribute. The string represents
a 32 character string representing the format to be used. The
nas-port-value ranges from 0 to 44.
Applies a predefined format to the nas-port-ID attribute.
commit—Saves the configuration changes and remains within the
configuration session.
end—Prompts user to take one of these actions:
• Yes— Saves configuration changes and exits the configuration
session.
• No—Exits the configuration session without committing the
configuration changes.
• Cancel—Remains in the configuration mode, without
committing the configuration changes.
OL-28375-03