Pppoe Session Limit And Throttle; Pppoe Session Limit; Configuring Pppoe Session Limit - Cisco ASR 9000 Series Configuration Manual

PPPoE Session Limit and Throttle

Configuring PPPoE PADO delay : An example
pppoe bba-group bba_1
pado delay 500
pado delay remote-id 100
pado delay circuit-id string circuit4 8000
pado delay service-name contains service 9950
!
end
PPPoE Session Limit and Throttle

PPPoE Session Limit

The PPPoE Session Limit support limits the number of PPPoE sessions that can be created on a BNG router.
As a result, it reduces excessive memory usage by the BNG router for virtual access.
This offers additional configuration flexibility on the BNG router by limiting the number of PPPoE sessions
for each:
• Line card
• Parent interface
• Peer MAC address
• Peer MAC address under individual access interface
• Circuit-ID
• Remote-ID
• Combination of Circuit-ID and Remote ID
• Access interface using the same Inner VLAN tag
• Access interface using the same Outer VLAN tag.
• Access interface using the same Inner and Outer VLAN tags
The PPPoE Session Limit support also limits the number of Inter Working Function (IWF) sessions for each
peer MAC address and for each peer MAC address under individual access interface.
See,

Configuring PPPoE Session Limit

Perform this task to configure PPPoE session limit for a PPPoE BBA-Group in BNG.
SUMMARY STEPS
1. configure
2. pppoe bba-group bba-group name
3. sessions {access-interface | circuit-id | circuit-id-and-remote-id | inner-vlan | {{mac | mac-iwf}
[access-interface] }} | max | outer-vlan | remote-id | vlan} limit limit-count [threshold threshold-count]
4. Use the commit or end command.
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Configuration Guide,
Release 4.3.x
120
Configuring PPPoE Session Limit, on page 120.
Establishing Subscriber Sessions
OL-28375-03