Configuring Service Accounting - Cisco ASR 9000 Series Configuration Manual

Configuring Service Accounting

• The keyword acct-stats must be configured in service-policy configuration to enable the service
Restriction
• IPv4 and IPv6 subscriber sessions has a single set of service accounting records. They are merged into
Configuring Service Accounting
Perform this task to configure service accounting through the dynamic template:
Before You Begin
You must configure subscriber accounting before performing this task. Refer
for IPv4 or IPv6 Subscriber Session, on page 84
SUMMARY STEPS
1. configure
2. aaa accounting service {list_name | default} {broadcast group {group_name | radius} |group
{group_name | radius} }
3. aaa service-accounting [extended | brief]
4. dynamic-template
5. type service dynamic-template-name
6. accounting aaa list {method_list_name | default} type service [periodic-interval time]
7. {ipv4 | ipv6} access-group access-list-name
8. service-policy {input | output | type} service-policy_name [acct-stats]
9. Use the commit or end command.
DETAILED STEPS
Command or Action
Step 1
configure
Example:
RP/0/RSP0/CPU0:router# configure
Step 2 aaa accounting service {list_name | default} {broadcast group
{group_name | radius} |group {group_name | radius} }
Example:
RP/0/RSP0/CPU0:router(config)# aaa accounting service l1 group
srGroup1
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Configuration Guide,
Release 4.3.x
60
accounting feature to report feature counter information as part of the records.
one set of bytes_in, bytes_out, packets_in, packets_out counters.
Configuring Authentication, Authorization, and Accounting Functions
for configuring procedure.
Purpose
Enters global configuration mode.
Creates an accounting list for service
accounting
Creating Dynamic Template
OL-28375-03