Cisco ASR 9000 Series Configuration Manual page 119

Establishing Subscriber Sessions
DETAILED STEPS
Command or Action
Step 1
configure
Example:
RP/0/RSP0/CPU0:router# configure
Step 2 vpdn template
Example:
RP/0/RSP0/CPU0:router(config)# vpdn template
Step 3
l2tp-class class_name
Example:
RP/0/RSP0/CPU0:router(config-vpdn-template)# l2tp-class class_temp
Step 4 tunnel busy timeout timeout_value
Example:
RP/0/RSP0/CPU0:router(config-vpdn-template)# tunnel busy timeout 456
Step 5 caller-id mask-method remove match match_substring
Example:
RP/0/RSP0/CPU0:router(config-vpdn-template)# caller-id mask-method
remove match m1
Step 6
dsl-line-info-forwarding
Example:
RP/0/RSP0/CPU0:router(config-vpdn-template)# dsl-line-info-forwarding
Step 7
ip tos type_of_service_value
Example:
RP/0/RSP0/CPU0:router(config-vpdn-template)# ip tos 56
Step 8 vpn id value
Example:
RP/0/RSP0/CPU0:router(config-vpdn-temp)# vpn id 3333:33
OL-28375-03
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Configuration Guide, Release
Provisioning PPP LAC Session
Purpose
Enters global configuration mode.
Enters the VPDN template sub-mode.
Configures the l2tp class command.
Configure l2tp tunnel busy list
commands. The busy timeout value
ranges from 60-65535.
Configures options to apply on calling
station id by masking the characters
by the match substring specified.
Forwards the DSL Line Info attributes.
Sets IP ToS value for tunneled traffic.
The service value ranges from 0 to
255.
Specifies tunnel for a vpn and
configures the vpn id with the value
3333:33. The value ranges from
0-ffffff in hexadecimal.
4.3.x
107