Cisco ASR 9000 Series Configuration Manual page 169

Establishing Subscriber Sessions
Command or Action
Step 8
class-map type control subscriber match-any
class-map_name
Example:
RP/0/RSP0/CPU0:router(config)# class-map type control
subscriber match-any pta_class
Step 9
match protocol ppp
Example:
RP/0/RSP0/CPU0:router(config-cmap)# match protocol
ppp
Step 10 end-class-map
Example:
RP/0/RSP0/CPU0:router(config-cmap)# end-class-map
Step 11 Use the commit or end command.
Step 12 class-map type control subscriber match-all class-map_name
Example:
RP/0/RSP0/CPU0:router(config)# class-map type control
subscriber match-all ipoe_test
Step 13
match protocol dhcpv6
Example:
RP/0/RSP0/CPU0:router(config-cmap)# match protocol
dhcpv6
Step 14 end-class-map
Example:
RP/0/RSP0/CPU0:router(config-cmap)# end-class-map
Step 15 Use the commit or end command.
OL-28375-03
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Configuration Guide, Release
Purpose
Configures the class map control subscriber with a
match-any criteria.
Configures match criteria for the class configured in
the earlier step.
Configures the end class map.
commit—Saves the configuration changes and remains
within the configuration session.
end—Prompts user to take one of these actions:
• Yes— Saves configuration changes and exits the
configuration session.
• No—Exits the configuration session without
committing the configuration changes.
• Cancel—Remains in the configuration mode,
without committing the configuration changes.
Configures the class map control subscriber with a
match-all criteria.
Configures match criteria for the class configured in
the earlier step.
Configures the end class map.
commit—Saves the configuration changes and remains
within the configuration session.
end—Prompts user to take one of these actions:
• Yes— Saves configuration changes and exits the
configuration session.
DHCPv6 Features
4.3.x
157