Making Radius Server Settings; Configuring Radius Server Settings - Cisco ASR 9000 Series Configuration Manual

Configuring Authentication, Authorization, and Accounting Functions
Configuring AAA Attribute Format Function: An example
configure
aaa attribute format red
username-strip prefix-delimiter @
!
!
end

Making RADIUS Server Settings

In order to make BNG interact with the RADIUS server, certain server specific settings must be made on the
BNG router. This table lists some of the key settings:
Settings
Server host
Attribute list
Server key
Dead criteria
Retransmit value
Timeout value
Automated
testing
IP DSCP
For more making RADIUS server settings, see
For more making specific automated testing settings, see
For more making specific IP DSCP settings, see
Restriction
The service profile push or asynchronously pushing a profile to the system is not supported. To download a
profile from Radius, the profile must be requested initially as part of the subscriber request. Only service-update
is supported and can be used to change a service that was previously downloaded.

Configuring RADIUS Server Settings

Perform this task to make RADIUS server specific settings on the BNG router.
OL-28375-03
Description
Defines the RADIUS server details to which BNG will connect.
Defines which attribute list is to be used.
Defines the encryption status.
Defines the criteria that is used to mark a RADIUS server as dead.
Defines the number of retries the BNG makes to send data to RADIUS server.
Defines how long BNG waits for the RADIUS server to reply.
Defines the duration after which automated testing will start and the username to be
tested.
Allows RADIUS packets to be marked with a specific Differentiated Services Code Point
(DSCP) value.
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Configuration Guide, Release
Making RADIUS Server Settings
Configuring RADIUS Server Settings, on page
Configuring Automated Testing, on page
Setting IP DSCP for RADIUS Server, on page
43.
47.
49.
4.3.x
43