Configuring Remote Syslog Server; Backing Up And Restoring System Configuration - Cisco CVR100W Administration Manual

Administering Your CVR100W

Backing Up and Restoring System Configuration

STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
Backing Up and Restoring System Configuration
!
CAUTION
Cisco CVR100W Wireless-N 300M Router Administration Guide

Configuring Remote Syslog Server

To configure the remoter syslog server:
Choose Administration > Logging.
In the Log Mode field, check Enable to enable the logging feature.
In the Remote Log Server table, Click Add Row.
In the Remote Log Server field, enter the IP address of the remote syslog server.
In the Log Severity field, check which severtiy of events to log.
In the Enable field, check the box to enable the remote syslog server.
Click Save.
To delete an entry in the Remote Log Server table, select the entry and click
Delete. To edit an entry in the Remote Log Server table, select the entry and click
Edit. Make your changes, then click Save.
You can back up custom configuration for later restoration or restore the system
configuration from a previous backup from the Administration > Backup /
Restore Settings page.
During a restore operation, do not try to go online, turn off the CVR100W, shut down
the PC, or use the CVR100W until the operation is complete. This should take about
a minute.
7
99