Creating Or Modifying An Internet Access Policy - Cisco Small Business WRP400 User Manual

Configuring Network Security and Controlling Internet Access
Access Restrictions > Internet Access
STEP 1
STEP 2
STEP 3
STEP 4
Cisco WRP400 User Guide
• Schedule: Decide which days and what times you want the selected policy
to be enforced. Select the individual days during which the policy will be in
effect, or select Everyday. Then enter a range of hours and minutes during
which the policy will be in effect, or select 24 Hours.
• Website Blocking by URL Address: You can block websites with specific
URL addresses. Enter each URL in a separate URL field.
• Website Blocking by Keyword: You can block websites using specific
keywords. Enter each keyword in a separate Keyword field.
• Blocked Applications: You can filter access to various services accessed
over the Internet, such as FTP or telnet. You can block up to three
applications per policy.
- From the Application list, select the application you want to block. Then
click the >> button to move it to the Blocked List. To remove an
application from the Blocked List, select it and click the << button.
- If the application you want to block is not listed or you want to edit a
service's settings, enter the application's name in the Application Name
field. Enter its range in the Port Range fields. Select its protocol from the
Protocol drop-down menu. Then click Add.
- To modify a service, select it from the Application list. Change its name,
port range, and/or protocol setting. Then click Modify.
- To delete a service, select it from the Application list. Then click Delete.

Creating or Modifying an Internet Access Policy

Follow this procedure to create or modify an Internet Access Policy.
Select a number from the Access Policy drop-down menu.
Enter a name in the Policy Name field.
To enable this policy, select Enabled.
Click Edit List to select the computers that will be affected by this policy.
a. In the List of PCs window, enter individual MAC addresses or IP addresses, or
enter IP address ranges.
b. Click Save Settings to apply your changes, or click Cancel Changes to cancel
your changes. Then click Close close the window.
7
73