C. Third Stage (Disassembly of Planetary Gear)
1. Insert spring pin (1) into planetary gear shaft (2).
2. When pulling out the planetary gear shaft (2), re-
move the planetary gear (3), needle bearing (4) and
thrust collar (5).
3. Pull out the spring pin (1) from the planetary gear
shaft (2).
(When reassembling)
•
The spring pin should be assembled with forked
portion toward vertical direction of shaft.
D615-W02 May-2003
K&T Saw Shop 606-678-9623 or 606-561-4983
www.mymowerparts.com
(1) Spring Pin
(2) Planetary Gear Shaft
(3) Planetary Gear
(1) Spring Pin
REAR AXLE
615W513A
(4) Needle Bearing
(5) Thrust Collar
615W514A
5-7