CHAPTER 4
8354/8404
10. CLUTCH HOUSING DISASSEMBLY
10.1 FIRST STAGE (DISCONNECTION OF
MAIN TRANSMISSION COVER)
1. Disengage main transmission cover (1) attaching
bolt (2) and disconnect transmission cover.
(When reassembling)
•
Engage transmission rod (3) with transmission arm
(4) locking bolt (5) and perform locking both ends of
jawed washer firmly to prevent loosening.
•
Wipe out foreign matters or oil from the contacted
surface of clutch housing and main transmission
cover and apply a sealing agent.
Sealing agent
Three bond 1208D or equivalent
With main transmission fork set to Neutral, set trans-
mission arm (4) at the groove of main transmission
fork.
Sect.
Spec.
Tightening bolt, nut
M6
M8
4-28
K&T Saw Shop 606-678-9623 or 606-561-4983
www.mymowerparts.com
Tightening Torque
9.8 ~ 11.3 N·m
1.0 ~ 1.15 kgf·m
7.2 ~ 8.3 lbf·ft
23.5 ~ 27.4 N·m
2.4 ~ 2.8 kgf·m
17.3 ~ 20.2 lbf·ft
(1) Main Transmission Cover
(2) Bolt
(3) Transmission Rod
(4) Transmission Arm
(5) Locking Bolt
(6) Jawed Washer
615W445A
615W446A
D615-W02 May-2003