CHAPTER 4
8354/8404
12. TRANSMISSION CASE
12.1 DISASSEMBLY, ASSEMBLY
A. Disconnection of Transmission Group
a. First Stage (Disconnection of Hydraulic Pipe)
1. Loosen bolt (1) and disconnect intake pipe2 (2).
2. Loosen intake pipe 1 (3), filter support (4) and at-
taching bolt (5), (6) and disconnect intake pipe 1,
filter support and hydraulic filter assembly (7) in as-
sembly.
3. Loosen joint bolt (8) and disconnect hydraulic pipe
2 (9).
(When reassembling)
•
Apply Hydraulic pipe connection O-ring (10), (11)
with grease and take care of not damaged.
Sect.
Spec.
Joint bolt
M18
Tightening bolt
M8
M0
4-46
K&T Saw Shop 606-678-9623 or 606-561-4983
www.mymowerparts.com
Tightening Torque
49.0 ~ 58.8 N·m
5.0 ~ 6.0 kgf·m
36.2 ~ 43.4 lbf·ft
23.5 ~ 27.4 N·m
2.4 ~ 2.8 kgf·m
17.4 ~ 20.2 lbf·ft
48.1 ~ 55.8 N·m
4.9 ~ 5.7 kgf·m
35.5 ~ 41.2 lbf·ft
(1) Aux. Shift Shaft
(2) Spiral Bevel Pinion
(3) Front Drive Shaft
(4) 13 Gear Shaft
(CR option)
(1) Bolt
(7) Hydraulic Filter Assembly
(2) Intake Pipe 2
(8) Joint Bolt
(3) Intake Pipe 1
(9) Hydraulic Pipe2
(4) Filter Support
(10) O-ring
(5) Bolt
(11) O-ring
(6) Bolt
615W478A
(5) Idle Shaft
(6) Mid PTO Shaft
(7) PTO Drive Shaft
(8) PTO Shaft
(9) PTO Drive Shaft
615W480A
D615-W03 May-2003