Cub Cadet 8354 Service Manual page 162

CHAPTER 4 8354/8404
<Good Tooth Contact>
• More than 35% tooth contacted. The center is lo-
cated between one third and one half from small.
• Decrease shim (7) of bearing case (6) and move
bevel pinion shaft (2) in the direction of arrow. Move
some shim (4) of differential locking shift (5) to spi-
ral bevel gear (1) and move spiral bevel gear in the
direction of arrow.
* Repeat until good tooth contact and backlash
obtained.
• Increase shim (7) of bearing case (6) and move
bevel pinion shaft (2) in the direction of arrow. Move
some shim (3) gear (1) to differential locking shift
(5) of spiral bevel and move spiral bevel gear in the
direction of arrow.
* Repeat until good tooth contact and backlash
obtained.
4-58
K&T Saw Shop 606-678-9623 or 606-561-4983
www.mymowerparts.com
615W4B0A
615W4B1A
615W4B2A
D615-W02 May-2003