(When Reassembling)
•
Taking care of seal (12), insert into piston (11).
•
Apply the cylinder with transmission oil and insert
the piston.
•
Apply the bottom of the piston that contacts with the
connecting rod with grease.
•
Align with holes of shaft (8) and crank (7).
•
Apply the left and right bushes of the power lift body
with grease.
f. Bush
1. Remove bush (1), (2)
(When reassembling)
•
When assembling new bush, apply the boss and
bush of the hydraulic cylinder with transmission oil.
D615-W02 May-2003
K&T Saw Shop 606-678-9623 or 606-561-4983
www.mymowerparts.com
HYDRAULIC SYSTEM
(1) Shaft
(2) Crank
[A] Hole
(1) Bush
615W936A
(3) Elevating Arm
[B] Mark
615W937A
(2) Bush
9-31