Wheel Alignment - Cub Cadet 8354 Service Manual

CHAPTER 7 8354/8404

2. WHEEL ALIGNMENT

To improve control and safety running, front wheel is
applied with adequate inclination in the direction of left,
right and forward.
Camber Angle
Camber angle (A) = 2°
Camber not only decreases bending and warping
against vertical load and running resistance but
also keeps safety.
King Pin Angle
King pin angle (B) = 12.5°
King pin angle decreases rolling resistance of
wheel and improves vibration-preventative and
steering ability.
7-4
K&T Saw Shop 606-678-9623 or 606-561-4983
www.mymowerparts.com
Caster Angle
Caster angle (C) = 1.5°
Caster angle improves steering ability.
615W702A
Tow-in
Tow in (rear-full width) = 2 ~ 8 mm
Tow-in prevents one tire excessively worn though
parallel running with tow-in.
615W704A
(A) Front Width
615W703A
615W705A
(B) Rear Width
D615-W02 May-2003