Sixth Stage (Disassembly Of 22 Gear Shaft) - Cub Cadet 8354 Service Manual

CHAPTER 4 8354/8404
10.6 SIXTH STAGE (DISASSEMBLY OF 22
GEAR SHAFT)
1. Disengage snap ring (2) for 22 gear shaft (1) and
pull out 22 gear shaft from the clutch housing.
2. Loosen snap ring (3) for hole of clutch housing and
pull out bearing (4).
• When disassembling 25 gear shaft (1),
tap lightly the end of shaft using plas-
tic hammer not to be damage.
CAUTION
(When reassembling)
• Insert 22 gear shaft into gearing, seat bearing in
housing with snap ring for hole, and tap lightly gear
shaft.
• Snap ring should be assembled with rounding to-
ward bearing.
• When disassembling locking bolt from
bearing cover, take care of ball not to
be bounded.
CAUTION
4-32
K&T Saw Shop 606-678-9623 or 606-561-4983
www.mymowerparts.com
(1) 25 Gear Shaft
(2) Snap Ring
(3) Snap Ring
615W454A
(4) Ball Bearing
(5) Collar
D615-W02 May-2003