Brake Pedal; Disassembly, Maintenance - Cub Cadet 8354 Service Manual

6. BRAKE PEDAL

6.1 DISASSEMBLY, MAINTENANCE

[CHECK AND ADJUSTMENT]
A. First Stage (Clearance Adjustment of Brake
Pedal)
1. Disengage the brake pedal connection hook (1) and
measure the clearance of left and right pedals.
2. If the clearance of left and right pedals exceeds the
specified limit, loosen lock nut (2) and adjust clear-
ance using a turn buckle (3).
3. If setting clearance of pedal, tighten firmly with lock
nut.
IMPORTANT:
• Clearance of pedal should be equal in left and right.
Sect.
Clearance of brake pedal
(A)
Sect.
Gap between left and
right when depressing
brake pedal
B. Second Stage (Gap Adjustment of Stop
Switch)
1. Check the clearance between brake pedal (1) and
stop switch (2) and if it exceeds the specified limit,
loosen the lock nut (3) and readjust.
Sect.
Clearance between
brake pedal and stop
switch (B)
D615-W02 May-2003
K&T Saw Shop 606-678-9623 or 606-561-4983
www.mymowerparts.com
Specified
25 ~ 35 mm
0.98 ~ 1.38 in.
Specified
Within 5 mm
Within 0.197 in.
Specified
0 ~ 1 mm
0 ~ 0.039 in.
(1) Connection Hook
(2) Lock Nut
(1) Brake Pedal
(2) Stop Switch
BRAKE
615W605A
(3) Turn Buckle
615W606A
(3) Lock Nut
6-7