Table of Contents
Advertisement
2-9
OFFSET
This function enables the receive frequency to be quickly SHIFTED by a predetermined value; this
makes it easy to track duplex-transmissions or check repeater inputs/outputs.
Frequency offset may also be programmed manually.
The locations for frequency offset storage are numbered 00 to 47 with 00 acting as OFF, and the first 20
offsets are user programmable. The rest are used for quick offset memories.
Frequency offset may be programmed into VFO, memory channel and search banks. It is most
convenient to set-up in the VFO mode, then save the data to a specific memory channel for quick recall
at a later time. Frequency offset is primarily designed for memory channel use, as it is a rather complex
process to toggle on/off in the VFO mode. However when programmed, frequency offset is not
detrimental to normal operations.
The acceptable range of frequency offset is 0 MHz to 999.999999 MHz. Of course if the offset is set to 0
MHz, the frequency will not change. Before the FREQUENCY OFFSET function can be used, it first
needs to be configured (unless it is already factory programmed for certain bands).
2-9-1 Using pre-programmed frequency offset data
To access the frequency offset set-up menu, press the
key, then press the
46
key.
Advertisement
Table of Contents
