8-4 Configuration settings
The configuration menu is used to set fundamental operating parameters and other variables which do
not appear in any menu heading.
1. Press the
2. The configuration screen will appear.
The description of each menu is as follows:
BackLight
BEEP
RF-GAIN
10 MHz
TV-Format
I/Q BW
VSQ-LV
VSQ-DL
SERIAL
SPEED
FLOW
Main board
Panel board
Decoder board
RF-Unit
key, then press the
Backlight On/Off of the display
Beep On/Off
RF gain setting
Reference oscillator input select
Video format select
I/Q output bandwidth setting
Voice squelch level setting
Voice squelch delay setting
Serial port select
Serial port baud rate setting
Serial port flow control setting
Firmware version of the main (control) board (user upgradeable)
Firmware version of the control panel (user upgradeable)
Firmware version of the decoder board (user upgradeable)
Firmware version of the RF Unit (hard coded to chip)
key.
94