Table of Contents
Advertisement
4. The CUE icon will change to a green triangle icon indicating playback has taken place.
5. To stop playback, press the
8-2-4 Changing recorded channel
Recording always takes place on channel 0. To save a recording to memory, the memory contents need
to be moved to another vacant channel.
(Caution: Turning the main power switch off (on the rear panel) will delete all DVR memory contents.)
1. Press the
2. The data editor screen will appear.
CUE DATA MOVE 0 => 1 --- move memory contents to channel 1.
3. To change (select) memory channel, rotate the sub dial and validate with the ENT key.
8-3 Data Editor
Various data entries including memory channel, memory bank, search bank can be edited on this
screen.
To enter the Data Editor screen, press the
The following screen will appear:
key.
key, then press the
key.
key, then press the
82
key.
Advertisement
Table of Contents
