Table of Contents
Advertisement
In the CW mode, signals are recorded as mono.
Quality of playback sound may be degraded as compared with the original signals even if recorded
in the WFM mode or WAM mode.
The receive mode should not be changed during the recording process.
Never turn the main power switch off during recording, or loss of the recorded signal will result.
To play back the recorded signal properly, select the same receive mode as when signals were
recorded.
When DVR memory channels are all full, no further recording can be done.
8-2-1 Recording
1. Press the
2. The DVR will capture data beginning 6 seconds prior to the record key being pressed.
3. A red bullet and a white recording progress indicator will appear on the LCD.
8-2-2 Stop recording
1. Press the
2. The red round icon will be changed to CUE.
8-2-3 Playback audio
1. Press the
2. The color of the soft keys will change.
Clear blue --- Recorded (saved)
Dark blue --- Channel not used (empty)
(Example)
3. Press the desired (recorded) channel soft key to play back audio.
(On the above example, the
key to start recording.
key while recording.
key, then press the
Channel 0
Channel 1
Channel 2
Channel 3
Channel 4
Channel 5
key is available for playback.)
key.
Grey
Recorded
Blue
Empty
Blue
Empty
Blue
Empty
Blue
Empty
Blue
Empty
81
Advertisement
Table of Contents
