Table of Contents
Advertisement
8-4-7-1 Configure Voice level and delay time
1. Press the
2. The configuration screen will appear.
3. Press the
key or
4. Rotate the sub dial to select the voice level between 00 ~ 07. (Default value is 03.)
5. Then configure the delay time.
6. Using the
key or
7. Rotate the sub dial to set the time delay parameter between 000 ~ 255. (Default value is 008).
8. Press the
(Note) VSQ-LV (squelch level) and VSQ –DL (delay time) may be set independently.
8-4-8 Configure PC interface
The AR-ALPHA has one USB interface (REMOTE 1) and one RS-232C (REMOTE 2) serial interface.
(Note: REMOTE 1 and REMOTE 2 cannot be used at the same time.)
To access the configuration menu, perform the following steps:
1. Press the
2. The configuration screen will appear.
3. Press the
key or
4. Rotate the sub dial and select REMOTE 1 (USB) or REMOTE 2 (USB).
5. Press the
key to move the cursor to SPEED.
key, then press the
key to move the cursor to VSQ-LV.
key, move the cursor to VSQ-DL.
key to confirm entry.
key, then press the
key to move the cursor to SERIAL.
key.
RS-232C Port
key.
99
USB Port
Advertisement
Table of Contents
