Table of Contents
Advertisement
16.2 USB driver installation
◆ All following screenshots were made using Windows XP. Messages appearing on screen may
differ slightly depending on which version of the Windows operating system and which driver
version is used.
① Connect a USB cable to the REMOTE 1 socket on the rear panel of AR-Alpha, and to a spare
USB socket on the PC. (Cable type "USB-A to USB-B")
② Switch AR-Alpha on.
MAKE SURE THAT IN THE RECEIVER'S CONFIGURATION MENU, YOU HAVE "REMOTE 1"
SELECTED FOR "SERIAL", OTHERWISE THE USB CONNECTION WILL FAIL.
Windows detects the new hardware and begins the driver installation procedure.
③ Windows is asking to connect to Windows Update to
search for software.
Select "NO, NOT THIS TIME" and click "Next".
④ By default, Windows will select "Install the software
automatically", but you need to select "Install from a
list or specific location" instead.
Then click next.
144
Advertisement
Table of Contents
