Table of Contents
Advertisement
8. Press the
9. At this point, the data of bank 00, channel 04 is deleted and moved to bank 01, channel 00.
10. The screen will return to the previous display screen.
8-3-6 Copying memory channel
1. Press the
2. The data editor screen will appear.
3. Using the
4. The highlighted (in reverse color) number on the left side is the original memory bank and channel.
5. Rotate the sub dial to select the search bank. (Above example shows bank 00, channel 04).
6. Press the
7. Rotate the sub dial to select the memory bank and channel to be copied.
8. Press the
9. At this point, the data of bank 00 channel 04 is copied to bank 01, channel 00.
10. The screen will return to the previous display screen.
8-3-7 Moving scan group data
1. Press the
2. The data editor screen will appear.
3. Using the
key to confirm entry.
key, then press the
key or
key, move the cursor to MEM CH COPY.
key to move the cursor.
key to confirm entry.
key, then press the
key or
key, move the cursor to SCAN GR. MOVE.
key.
key.
87
Advertisement
Table of Contents
