Table of Contents
Advertisement
5-7 Channel Pass
When scanning, you may encounter active memory channels which you do not wish to currently monitor.
It is possible to manually force the scan process to continue.
5-7-1 Setting channel pass
1. Press the
2. Select the memory channel you wish to pass.
3. Press the
4. The 'PASS' icon will appear on the LCD.
You can also do the same on the memory channel browser screen.
Add the channel to the select memory.
Transfer the cursor data to the newest list.
Clear the displayed list.
key to enter the memory mode.
key, then press the
key.
70
Advertisement
Table of Contents
