Changing Scan Direction; Selecting A Scan Bank - AOR AR-ALPHA Operating Manual

① MODE:NFM
① IFBW:15k
① M01-22
① 399.462500 MHz
① MemCh01-22
VOICE
①
DTMF: AAAA
① M01-00Mem Ch01-00 398.030M Scan List
①
①
Display during memory scan
While scanning, the blinking
If more than one memory channel is programmed into the current memory bank, when an 'active' channel
has been located (busy, so the squelch opens), the scan process will temporarily pause on the active
channel, and the memory location will be displayed along with any accompanying text.
Soft key operations
Read the memory channel at the cursor.
Move the cursor to the recently scanned channel.
Clear (delete) the scan list.

5-3-1 Changing scan direction

5-4 Selecting a scan bank

To select another memory bank for scanning, use the numeric keypad to enter 4 digits.
If no data is available, the next bank with valid data will be recalled (empty memory banks are skipped).
To exit from the SCAN mode, press the VFO key.
Item
appears instead of memory channel frequency.
 scanning
Scanning direction can be changed by rotating the main dial.
(Example: Select bank 02)
Operation
Receive mode
Receiver IF bandwidth
Bank 01, Channel 22
Memory channel frequency
Memory channel text
Decoding mode: VOICE
DTMF decoded data
Cursor
Current receive channel
67