Connecting The Monitor, Keyboard, Mouse, And Ups; Introduction; Connecting The Monitor, Keyboard, And Mouse - HP NetServer LC 2000r Installation Manual

9 Connecting the Monitor, Keyboard,
Mouse, and UPS

Introduction

This chapter provides the instructions for connecting a monitor, keyboard, mouse
and Uninterruptible Power Supply (UPS) to the rear of the HP NetServer.

Connecting the Monitor, Keyboard, and Mouse

To connect the peripheral control devices and monitor to the HP NetServer
LC 2000/2000r, refer to the following procedure.
1. Connect the monitor, keyboard, and mouse to the HP NetServer
LC 2000/2000r using the connections provided on the rear of the chassis.
See Figure 9-1.
Keyboard
Video
(Embedded)
Figure 9-1. Connection Ports (rear of chassis)
Mouse
NIC Serial Management
97