Connecting The Monitor, Keyboard, And Mouse - HP NetServer LH 6000 Installation Manual

9 Connecting the Monitor, Keyboard,
and Mouse
Connect the monitor, keyboard, and mouse cables to the appropriate connectors
on the rear of the chassis.
Serial Port
Parallel Port
Mouse Port
Keyboard Port
LAN Port
Monitor Port
Power
Supply
Modules
(4 max.)
Power Module
Status LEDs
Figure 9-1. Rear View of LH 6000/LH 6000r
NOTE
If you have installed your HP NetServer LH 6000r into a rack,
refer to the HP NetServer LH 6000r Rack Cabling Reference
Guide for instructions on how to cable the NetServer to
external connections.
The HP NetServer performs a diagnostic test when it is connected to an external
power source, and then performs another test when the power switch is turned on.
If an error condition occurs, note any error code appearing on the front panel.
Refer to the error messages in Chapter 12, "Troubleshooting."
All manuals and user guides at all-guides.com
1 2 3
Remote
Management
Port
1
2
3
4
5
Hot Plug
6
PCI LEDs
7
8
4
Power
Supply
Cages (2)
Power
Connectors
99