Reporting Alarms; About The Keypad; Keypad Keys; Status Icons / Led's - Bosch Solution 64 User Manual

Solution 64 User Guide
Re por t ing Al ar m s
Your system may be programmed to send reports to your security
company. Once the report is complete, the system returns
the telephone to normal operation (check with your security
company).
Your system makes repeated attempts to send reports to your
security company. If your system fails to report, the keypad will
display the 'service' symbol.
Abo ut t he Keypa d
Your keypad has 20 keys or buttons. The buttons allow you to
input instructions and navigate the menu screens as required.
Some buttons have a secondary function which is activated by
holding them down for two seconds.
Each button's function is described below:

Keypad Keys

Key
The numeric keys allow you to enter you
to
numbers when required
Use the [MENU] and the numeric keys to
enter commands. The [MENU] key is also
used to go back one level when navigating
through menus or to exit a programming
location without saving changes.
The [ON] key allows you to turn an area
or output on. To turn all areas on at the
same time when the system has been
partitioned, press and hold the [ON] key
for two seconds.
The [PART] key allows you to turn an area
Part On. This key can also be used to
bypass a zone or multiple zones when you
press and hold for two seconds.
The [OFF] key allows you to turn an area
or output off. To turn all areas off at the
same time when the system had been
partitioned, press and hold the [OFF] key
for two seconds.
The [OK] key allows you to save any changes
and exit the command.
The [MAIL] key allows you to read stored
mail. This key can also be used to initiate
a dialler test when you press and hold for
two seconds.
The [] key allows you to move the cursor
left when programming text or telephone
numbers.
The [] key allows you to move the cursor
right when programming text or telephone
numbers.
The [↑] key allows you to navigate through
menus or to toggle characters when
programming telephone numbers.
6
Description
Key
The [] key allows you to navigate
through menus or to toggle characters
when programming telephone numbers.
Pressing The [] key will display current
trouble conditions when the area that the
keypad is displaying is disarmed.
Pressing the 1 and 3 keys together and
holding them down for 2 seconds will
+
cause a Panic alarm to be triggered. If
programmed the sirens will sound and the
for 2 sec
monitoring station will be notified.
Pressing the 4 and 6 keys together and
holding them down for 2 seconds will cause
+
a Fire alarm to be triggered. If programmed
the sirens will sound and the monitoring
for 2 sec
station will be notified.
Pressing the 7 and 9 keys together and
+ holding them down for 2 seconds will
cause a Medical alarm to be triggered. If
programmed the sirens will sound and the
for 2 sec
monitoring station will be notified.
Table 2: Keypad Keys and Their Function

Status Icons / LED's

The following table describes the function of each of the status
icons.
Icon Status
The keypad can display which areas (1 – 8) are
turned on or off via the Area Icon Indicators. This
programmable option can be disabled in MENU
On The area is turned All On or Part On
The area is turned Off
Off
Flashing
The area has an alarm
Fast
System power is normal
On
Flashing System power is missing
A fire alarm is active
Flashing
No fire alarm
Off
Fire alarm in memory
On
(Turn the area All On and Off to Clear).
The existing service or trouble condition
On
has been acknowledged.
No service or trouble conditions exist
Off
A service or trouble condition is present
Flashing
that has not been acknowledged.
The area is turned Part On.
On
The area is not turned Part On.
Off
Description
Meaning
Bosch Security Systems 09/06 BLCC110U