Placing A Call On Hold; Parking A Call - Nortel i2002 User Manual

Standard—Nortel Networks Confidential
50 Chapter 4 Making calls
5 To complete the conference call, press the Join softkey.

Placing a call on hold

To place a call on hold
1 Press the Hold button to place the other party on hold. The
beside the line button flashes.
2
Press the Hold button a second time, or press the line button associated with
the call on hold to resume the conversation

Parking a call

You can park an active call so that another user can retrieve it. A call can either be
parked and assigned a call ID for general retrieval or it can be parked for a specific
user. Refer to
ID to retrieve a parked call. If a call is parked for you specifically, then a message
displays on your telephone with softkeys to Retrieve, Ignore or make a new Call.
To park an active call for general retrieval
1 Press the Park softkey.
2 Press the Park softkey again. The display shows the parked call and the call
ID number to retrieve it.
NN10319-111
Tip: Any party, including the originator of the conference call, may hang
up and the remaining callers on a conference call will still be connected.
"Retrieve parked call" on page
Tip: This feature must be enabled in your service package. Contact your
system administrator for more details.
75, for instructions on entering a call
icon