Placing A Call On Hold; Auto Dial - Nortel M2006 Quick Reference Manual

Auto Dial

lets you dial a specific telephone number by pressing a feature key.
To store an Auto Dial number:
ç
ç
To use Auto Dial:
ç
To display the Auto Dial number:
œ
ç

Placing a call on hold

Use the Hold feature to place a call on hold. An example of where hold would be
useful would be to answer a call on a second line without disconnecting from your
original call.
To place a call on hold:
˙
º
To retrieve a call on hold:
∫ 2637
Introducing your Meridian Digital Telephone
1. Without lifting the handset, press
Dial. The associated LCD
Indicator flashes º.
2. the number.
Dial
3. Press Auto Dial
1. Lift the handset
press a DN Key (see Note below).
2. Press Dial. The stored number is
Auto
dialed automatically.
1. Press Display.
2. Press Auto Dial. The number is displayed.
Note: A DN (Directory Number) Key is used to
access a line on your telephone.
Press Hold. The LCD indicator
beside the line on hold.
The LCD indicator flashes slowly.
The caller may hear music if this is
programmed on your system.
Press the Key beside the flashing LCD
DN
indicator
º
.
Auto
again.
or
flashes
º
2