Nn10319; Entering An Address - Nortel i2002 User Manual

Standard—Nortel Networks Confidential
42 Chapter 4 Making calls
To make a call with
the...
Handset
Headset button

Entering an address

To make a call you can dial a number (numeric address such as, 555-1212) or an
alphanumeric SIP address (jdoe2@domain.com).
To enter an address using the dialpad
1
Dial the number using the dialpad. When dialing, the left navigation button
acts as a backspace button.
2 When you finish dialing the number, the phone automatically places the call if
nothing has been entered for a short time. You can expedite the dialing by
pressing the Send softkey.
To enter an address using alphanumeric dialing
1 Once off-hook, press the Alpha softkey to begin dialing.
2 After entering the name or word, press the Send softkey, or wait for the phone
to place the call.

NN10319-111

Do this...
Pick up the handset.
Press this button to go off-hook on the primary line
(the green line button) and produce a dial tone.
Tip: Press
Note: For more information about alphanumeric dialing see
alphanumeric characters" on page 21
page 31. If the NoAlph softkey appears on your display then
alphanumeric dialing is already enabled.
to disconnect from the call at any time.
and "Setting preferences" on
"Entering