Installing Your I2002 Internet Telephone - Nortel i2002 User Manual

Standard—Nortel Networks Confidential

Installing your i2002 Internet Telephone

To connect your i2002 Internet Telephone
1 Connect one end of the handset cord to the handset jack (identified with a
handset icon) on the telephone base, and connect the other end of the handset
cord to the handset.
2 Choose one of the following connections:
a
b For a telephone sharing a LAN access with a PC:
3
Plug the AC adapter plug into the base of the telephone.
4 Plug the AC adapter into the nearest electrical outlet.
5 Ensure that your power cable and handset cable are properly fitted into the
provided slots.
6 Once the power cable and handset cable are secured tightly in place and flush
with the bottom of the phone set, take the base and hinge it into the plastic
slots at the front of the phone set. Then, press down firmly until the base snaps
into place.
Chapter 1 Setting up and initializing your i2002 Internet Telephone
Warning: Severe damage will occur if this set is plugged into an ISDN
connection. Contact your administrator to ensure that you plug the set into
a 10/100-BaseT Ethernet jack.
For a telephone not sharing a LAN access with a PC:
Connect one end of the Ethernet cable to the Ethernet plug (identified
with a network icon) on the telephone, and the other end to your 10/
100-BaseT Ethernet jack.
Complete step a and connect one end of a second Ethernet cable to the PC
Ethernet port (identified with a PC icon) on the back of the telephone and
the other end to the computer's Ethernet port.
Tip: If you have trouble locking the base, or if the phone wobbles on
your desktop, re-examine the phone's cables to ensure the cables are not
obstructing the base.
i2002 Internet Telephone User Guide
3