I2002 Internet Telephone Indicator - Nortel i2002 User Manual

Standard—Nortel Networks Confidential
84 Using the Multimedia PC Client and the i2002 Internet Telephone
2 Check Use the i200x... to indicate that you want the i2002 Internet Telephone
to provide premium-quality voice while the PC provides advanced IP and
multimedia services.
3
Enter the port number (and optionally the MAC address) for the i2002
Internet Telephone.
4
Check whether you wish the network to take over control of the i2002 Internet
Telephone when the Multimedia PC Client exits.The default is that this
feature is activated. This step is optional.
5
Check whether the Multimedia PC Client should route voice to/from the
telephone set for private IP addresses.This option may be required if you are
using a private LAN in a home office.In this case, the S1 (server 1) and S2
(server 2) settings on the i2002 Internet Telephone must be set to the PC's IP
address in order for the Multimedia PC Client to control the phone. Refer to
Appendix B, "Setting DHCP parameters," on page
not usually required for work office use.The default for this feature is not
active.This step is optional.
6 Click Ok to save your changes or Cancel to exit without saving.

i2002 Internet Telephone indicator

The Multimedia PC Client main window has a status area with a telephone icon.
This icon lights up when the Multimedia PC Client controls the i2002 for voice
telephone.
NN10319-111
Tip: The Multimedia PC Client can automatically detect and fill in the
MAC address field with information it obtains from the first Internet
Telephone that attempts to contact it on the port specified in
Step 4.
85, for instructions. This is