Setting Up - Macintosh; Installation Using The Chooser Window; Section 4 Setting Up - Netware; Section 6 Setting Up - Axis 560 User Manual

Section 7: Setting Up - Macintosh
86

Section 7 Setting Up - Macintosh

Installation Using the Chooser Window

Basic Configuration
Having connected the AXIS 560 to your network, this section now
describes how to set up your AXIS 560 for printing in Macintosh
environments using AppleTalk.
If you intend to operate your AXIS 560 in a multiprotocol
environment, you should also proceed to the other relevant sections in
this manual, namely:
Section 4 Setting Up - NetWare, on page 43
Section 5 Setting Up - Windows, on page 54
Section 6 Setting Up - OS/2, on page 80
Section 8 Setting Up - UNIX, on page 92
Note: The AXIS 660 does not support printing in the Macintosh
environment.
Basic configuration in AppleTalk is performed simply by opening the
Chooser window and selecting a printer.
You can change the default name of your AXIS 560 or any of default
parameters by editing the config file. To access the config file from a
Macintosh, you can use:
• any Java enabled Web browser
• FTP using MacTCP, Fetch or Anarchie
In order to use any of the methods, you must assign an IP address to
the AXIS 560 as described in Setting Parameters, on page 90.
AXIS 560/660 User's Manual